I
R
H
R
H
12
FINAL INSTALLATION INSTRUCTIONS
9. Secure the shade (J) to switch housing (H) by twisting
in a clockwise direction. Do not over -tighten.
7. Remove three switch housing screws (R) on the switch
housing (H) and keep for later use.
7
8. Attach the connector from light kit (I) to the connector
from the motor assembly. Align three holes on the light
kit (I) and the switch housing (H). Re-install the switch
housing screws (R) to attach the light kit (I) to the
switch housing (H). Tighten all switch housing screws (R)
securely.
NOTE:
The two connectors have keyholes that must
be mated correctly before they can be engaged.
8
9
J
H
(remove)
