background image

 

READ AND SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

2

SAFETY INFORMATION

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

 repairs, it must be shipped in its original packaging to ensure proper protection against damage
 that might exceed the initial cause for return.

• 

Make sure all electrical connections comply with local codes, ordinances, the National Electrical

 Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring
 handbook if you are unfamiliar with installing electrical wiring.

 

• 

Make sure the installation site you choose allows a minimum clearance

 of 

7 ft. from the blades to

 the floor.

• 

 After you install the fan, make sure that all connections are secure to prevent the fan from falling.

•  The net weight of this fan is: 21 lbs.

Safety Information  ...............................................................................................................

Package Contents  ...............................................................................................................4

Hardware Contents  .............................................................................................................

Preparation ..........................................................................................................................

Assembly Instructions  .........................................................................................................6

Operating Instructions   ......................................................................................................

Care and Maintenance  ......................................................................................................12

Troubleshooting .................................................................................................................12

Limited Lifetime Warranty  ..................................................................................................13

2

5

5

11

Summary of Contents for JP18BZ3














Reviews: