background image

ITEM/ARTICULO #0065388

E192641

KIAWAH/

CEILING FAN

KIAWAH/

VENTILADOR DE TECHO 

(página 12)

MODEL/MODELO #E-PAR52CB5C

 

WARNINGS

 

• 

READ AND SAVE THESE INSTRUCTIONS.

• Read this manual carefully and completely before attempting to assemble, install or operate this product.

• Be sure you read and understand the Safety Information on page 3 of these instructions.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be

shipped in its original packaging to ensure proper protection against damage that might exceed the initial cause for 

return.

• 

         CAUTION

: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

•           

WARNING:

 To reduce the risk of fire or electric shock, do not use this fan with variable speed switch.

•           

WARNING:

 To reduce the risk of fire, electric shock, or personal injury, do not bend the blade arms when

installing them, balancing the blades, or cleaning the fan. Do not insert foreign objects between the rotating fan 

blades. Mount to outlet box marked "ACCEPTABLE FOR FAN SUPPORT" and use mounting screws provided with 

the outlet box.  Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan 

support and may need to be replaced. Consult a qualified electrician if in doubt.

•           

DANGER:

 If using this fan in a DAMP location, this fan must be connected to a supply circuit that is

protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock or 

death.

Questions, problems, missing parts?

 Before returning to your retailer, call or contact our customer service 

department at 1-800-527-1292, 8:30 a.m.-5:00 p.m., CST, Monday-Friday or www.litexfans.com.

Harbor Breeze® is a registered trademark 

of LF, LLC. All Rights Reserved.

Federal regulations require ceiling fans with light kits manufactured or imported after 
January 1, 2009, to limit total wattage consumed by the light kit to 190W.  Therefore, 
this fan is equipped with a wattage limiting device. If you lamp this fan's light kit with 
bulbs totaling more than 190W, the wattage limiting device will reduce the watts 
consumed to 190W.

1

LISTED

For

Damp Location

Summary of Contents for KIAWAH
























Reviews: