9
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1 . Remove the downrod pin (EE) and downrod clip
(FF) from the downrod (A) . Then partially loosen the
motor housing set screws (GG) in the yoke at the top
of the motor housing (E) .
Helpful Hiat:
Standard mounting is best suited for
ceilings 8 ft . or higher . For taller ceilings you may
want to use a longer downrod (not included) . Angle
mounting is best suited for angled or vaulted ceilings .
A longer downrod is sometimes necessary to ensure
proper blade clearance .
Haodwaoe Used
EE
Downrod Pin
x 1
FF
Downrod Clip
x 1
GG
Motor Housing
Set Screw
x 2
E
A
EE
FF
GG
A
1
2 . Insert the downrod (A) through the canopy (B) and
yoke cover (F) . Thread the wires from the motor
assembly (E) through the downrod (A) .
2
B
K
F
E
A
