11
BLADE INSTALLATION
CANOPY HOUSING INSTALLATION
CAUTION
Do
not connect fan blades until the fan is
completely installed. Installing the fan with
blades assembled may
result
in damage to
the fan blades.
WARNING
To avoid possible fire or shock, make
sure that the electrical wires are com-
pletely inside the canopy housing and
not pinched between the housing and
the ceiling.
1. Remove one of the two shoulder screws in the
hanger bracket (B). Loosen the second
shoulder screw without fully removing it.
Assemble ceiling canopy (D) by rotating key
slot over shoulder screw in hanger bracket (B).
Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was
previously removed. (Fig. 1)
2.
Securely
attach and tighten the canopy
screw
cover (E) over
the
shoulder
screws
in
the
hanger
bracket (B), utilizing the keyslot
twistlock feature. (Fig. 2)
1
1
D
2
E
1.
Remove and discard the motor stops from the
motor assembly (A) by removing the screws.
(Fig. 1)