13
LIGHT KIT FITTER ASSEMBLY INSTALLATION (Continued)
G
J
3. Securely attach the two single-pin down light
connector from the light kit fitter assembly (G)
to the socket plate assembly (J). (Fig. 3)
3
2. Securely attach the 9-pin connector from the
motor assembly (A) to the wire harness socket
within the light kit fitter assembly (G). (Fig. 2)
2
A
G
G
J
4. Remove one of the three screws in the light
kit fitter assembly (G). Slightly loosen the
remaining two screws. Assemble the socket
plate assembly (J) to the light kit fitter
assembly (G) using the two key slots in the
socket plate assembly (J). Replace the third
screw and secure all three screws. (Fig. 4)
4