3.
6
Turn off circuit breakers and wall switch to the fan
supply line leads.
DANGER:
Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
2.
ASSEMBLY INSTRUCTIONS
ON
OFF
ON
OFF
2
1
7 ft
min.
This fan assembly (A) can only be mounted on an
indoor wall or on an enclosed porch or enclosed
patio wall.
To prevent personal injury and damage, ensure
that the hanging location allows the fan assembly
(A) a clearance of 7 ft. from the floor to prevent
accidental contact with the blade.
CAUTION:
If you are going to attach the fan
assembly (A) to a wood stud or wood post, the
stud or wood post must be wide enough and thick
enough to sustain the wall mounting bracket (B)
and the weight of the fan assembly (A).
Determine the approximate position of where you
want the fan to be located on the wall. Then,
locate the stud in the wall. Position wall mounting
bracket (B) on wood stud or wood post and mark
the location of the four holes using a pencil or a
marker (not included).
WARNING:
To reduce the risk of fire,
electrical shock or personal injury, use all four
mounting holes (two at the top and two at the
bottom) in wall mounting bracket (B) when
installing wall mounting bracket (B).
A
Stud
7 Ft.
3
B
