13
OPERATION INSTRUCTIONS
The pull chain located on the switch housing has
four positions to control
fan
speed. One pull is
HIGH, two is MEDIUM, three is LOW and four turns
the fan OFF. (Fig. 1)
1.
2.
2C
2A
2B
Switch
Housing
1
Switch
Housing
2
Use the fan reverse switch, located on the switch
housing (B), to optimize your fan for seasonal
performance. (Fig. 2) A ceiling fan will allow you
to raise your thermostat setting in summer and
lower your thermostat setting in winter without
feeling a difference in your comfort.
Note:
Wait for fan to stop before moving the
reverse switch.
2A. In
warmer
weather, setting the
reverse switch to the
LEFT
will result in
downward airflow creating a wind chill
effect. (Fig. 2A)
2B. In
cooler
weather, setting the reverse
switch to the
RIGHT
will result in upward
airflow that can help move stagnant, hot air
off the ceiling area.(Fig. 2B)
IMPORTANT
: Reverse switch must be set either
completely
to the
RIGHT
or
completely
to the
LEFT
for fan to function. If the reverse switch is
set in the
middle
position (Fig. 2C), fan will not
operate.
