BLADE INSTALLATION
13
1
CC
BB
H
G
CAUTION
Do not connect fan blades until the fan is
completely installed. Installing the fan with
blades assembled may result in damage to
the fan blades.
1. Position the blade (H) over the blade holder
arm (G) with threaded posts showing. Make
sure the bottom edge of the blade (H) is fully
seated against the blade holder arm (G).
Tighten washer-head screws (BB) with fiber
washers (CC) to secure the blade (H) to the
blade holder arm (G). (Fig. 1)
Hardware Used
BB
x 12
Washer-Head
Screws
CC
x 12
Fiber
Washers
A
G
AA
2
WARNING
To reduce the risk of personal injury, do
not bend the blade holders when install-
ing, balancing the blades or cleaning the
fan. Do not insert foreign objects in
between the rotating blades.
Hardware Used
AA
x 8
Screws
NOTE: Periodically check blade holder hardware
and resecure if necessary.
2. Attach blade holder arms (G) to the hub of
motor assembly (A) using screws (AA). (Fig. 2)
