Install four candelabra base 40-watt max. bulbs (P)
included. (Fig. 10)
Important:
When you need to replace bulbs, please
allow bulb(s) and glass shades(s) (I) to cool down
before touching the bulb(s) or the glass shades(s) (I).
FINAL INSTALLATION
10.
10
11.
I
A
P
14
F
Pull chain extensions (O) supplied in one of the
hardware packs or custom pull chain extensions
(sold separately) may be attached to fan and light
pull chains. (Fig. 11)
Note
: This fan is remote control adaptable (remote
control sold separately).
The pull chain located on the switch housing
(E), has four positions to control
fan
speed.
One pull is HIGH, two is MEDIUM, three is
LOW and four turns the fan OFF. (Fig. 1)
The pull chain in the middle is used to turn the
light
ON or OFF. (Fig. 2)
OPERATION INSTRUCTIONS
1.
2.
11
O
1
2
E
F