INITIAL INSTALLATION
6
A
B
2
17° max.
Open End
C
C
2. Determine mounting method to use.
A.
Downrod mount (standard or angled ceiling).
B.
Closemount (standard ceiling only).
IMPORTANT:
If using the angle mount, check to
make sure the ceiling angle is not steeper than 17°.
*Helpful Hint:
Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance. Closemount mounting is more suitable
for ceilings lower than 8 ft. high.
Check to make sure blades (J) will be at least
30 in. from any obstruction and at least 7 ft.
above the floor.
3.
Secure mounting bracket (C) to outlet box (not
included) using screws, spring washers and flat
washers provided with the outlet box.
*
NOTE:
It is very important you use the proper
hardware when installing the mounting bracket (C)
as this will support the fan.
IMPORTANT
: If using the angle mount, make
sure open end of mounting bracket (C) is installed
facing the higher point of the ceiling, and ensure
the ceiling angle is not steeper than 19°.
4.
ANGLE
MOUNT
STANDARD
MOUNT
7 ft.
min.
30 in.
min.
J
3
4
