5.
Plug the 12 Volt DC Adapter Transformer (part #14) into a grounded, 3-Hole, 120
Volt electric outlet. (See Figure A.)
6.
Follow the directions in Step #1 to fully charge the Batteries (part #11).
7.
When the charging process is completed, disconnect the 12 Volt DC Adapter
Transformer (part #14) from the grounded, 3-Hole, 120 Volt electric outlet.
(See Figure A.)
8.
Disconnect the 12 Volt DC Adapter Transformer Output Line (part #14) from the
Battery Electric Supply Line (part #12). (See Figure F.)
9.
Plug the Battery Electric Supply Line (part #12) back into the Wiring Harness
(part #13). (See Figure F.)
10.
Re-install the Seat (part #15) on the ATV. (See Figure C.)
ADAPTER
TRANSFORMER
OUTPUT LINE
(#14)
WIRING
HARNESS
(#13)
BATTERY ELECTRIC SUPPLY LINE (#12)
BATTERIES (#11)
FIGURE F
OPERATING INSTRUCTIONS
1.
Once seated on the ATV, select the desired speed (Low or High) and direction
(Forward or Reverse) on the Instrument Panel (part #18). (See Figure C.)
2.
Insert the Ignition Key (part #22) into the Ignition Switch, and turn the Ignition Key
counterclockwise to turn on the ATV. (See Figure C.)
3.
Then, step on the Throttle Pedal (part #19) to move the ATV at the pre-selected
speed and in the pre-selected direction.
SKU 03516
PAGE 10