background image

Page 2

SKU 2888

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram.  Keep your invoice with this
manual.  Write the invoice number on the inside of the front cover.  Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using this product, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.

Observe work area conditions.  Don’t expose to rain.

2.

Keep children away.    Do not let them play with the Range Finder.

3.

Store idle equipment.  When not in use, the Range Finder must be stored in a dry

location to protect the lenses and to inhibit rust.  Always keep the Range Finder out of
reach of children.

4.      Use the right product for the job.   There are certain applications for which this

Range Finder was designed. Do not modify this Range Finder and do not use this
Range Finder for a purpose for which it was not intended.

5.

Maintain tools with care.  Inspect the Range Finder periodically, and if damaged,

have it repaired by an authorized technician. The Range Finder must be kept clean,
and dry.

6.

Stay alert.  Watch what you are doing, use common sense. Do not operate the Range

Finder when you are tired.

7.

Check for damaged parts.  Before using the Range Finder, any part that appears

damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for any broken parts or mounting fixtures; and
any other condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.

8.

Replacement parts and accessories.  When servicing, use only identical

replacement parts. Use of any other parts will void the warranty.

Magnification

8 x 21

Overall Dimensions

1-1/8” Dia. x 3-1/2” L

Range Increments Reading

Yards (200, 150, 100, 75, 50)

Lens Diameter

13/16” Front, 17/32” Rear

Weight

.2 Lbs

02888.p65

12/2/2002, 8:46 AM

2

Summary of Contents for 2888

Page 1: ...arborfreight com For technical questions and replacement parts please call 1 800 444 3353 Model 2888 Copyright 2002 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools 02888 p65 12 2 2002 8 46 AM 1 ...

Page 2: ...plications for which this Range Finder was designed Do not modify this Range Finder and do not use this Range Finder for a purpose for which it was not intended 5 Maintain tools with care Inspect the Range Finder periodically and if damaged have it repaired by an authorized technician The Range Finder must be kept clean and dry 6 Stay alert Watch what you are doing use common sense Do not operate ...

Page 3: ... distance measured is an approximate distance Note Before operation run the thin strap on the end of the Hand Strap through the loop on the Range Finder Slide the Hand Strap backthrough itself to secure it See Assembly Drawing on page 4 1 Line up the bottom of the flagstick the entire flagstick must be visible with the Green Line See FIGURE 1 2 Line up the top of the flagstick with the yardage mar...

Page 4: ...PAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATESTHAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR A...

Reviews: