SKU 40134
Page 3
6.
Dress properly
. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
7.
Use eye and ear protection
. Always wear ANSI approved impact safety
goggles when working with tools and equipment.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not
reach over or across running machines.
9.
Maintain tools with care
. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and, if damaged, have them repaired by an
authorized technician.
10.
Disconnect power
. Unplug tools when not in use.
11.
Remove adjusting keys and wrenches
. Check that keys and adjusting
wrenches are removed from tools or work surfaces before using.
12.
Avoid unintentional starting
. When using power tools, be sure the switch is
in the Off position when not in use and before plugging in. Do not carry any
tool with your finger on the trigger, whether it is plugged in or not.
13.
Stay alert
. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
14.
Check for damaged parts
. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use the tool
if any switch does not turn On and Off properly.
15.
Guard against electric shock
. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
16.
Replacement parts and accessories
. When servicing this product, use
only identical replacement parts. Use of any other parts will void the warranty.
Only use accessories intended for use with this tool. Approved accessories
are available from Harbor Freight Tools.
17.
Do not operate tools if under the influence of alcohol or drugs
. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate tools.
