SKU 65003
For technical questions, please call 1-800-444-3353.
Page 11
maintEnanCE anD
SERViCing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO pREVEnt
SERiOuS injuRY
FROm aCCiDEntaL
OpERatiOn:
make sure trigger is in the
“OFF” position and unplug
and remove Battery pack
before performing any
inspection, maintenance, or
cleaning procedures.
tO pREVEnt SERiOuS
injuRY FROm tOOL
FaiLuRE:
Do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, maintenance, and
Lubrication
BEFORE EaCH uSE,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, and any other condition
that may affect its safe operation.
aFtER uSE,
2.
clean external surfaces
of the tool with clean cloth. Do not
use harsh solvents to clean Blower.
Make sure Blower Tube is free of dirt
3.
and debris. Do no allow debris to ac-
cumulate inside Blower.
The batteries contained in the Battery
4.
Pack are nickel-cadmium (Ni-CD).
Do not dispose of Ni-CD batteries in
household waste.
Follow all local regulations regarding
5.
the proper disposal of Ni-CD batter-
ies.
6.
WaRning! if the Charger cord
is damaged, it must be replaced
only by a qualified service techni
-
cian.
Record Serial number Here:
note:
If product has no serial number, record
month and year of purchase instead.
note:
Some parts on Parts List and Diagram
are listed and shown for illustration
purposes only, and are not available indi-
vidually as replacement parts.
