SKU 65003
For technical questions, please call 1-800-444-3353.
Page 5
lint or any material that may block air
flow.
Maintain a balanced stance during
9.
use.
Only use in adequate light.
10.
Do not leave the tool unattended
11.
when it is plugged into an electrical
outlet. Turn off the tool, and unplug it
from its electrical outlet before leav-
ing.
Fully charge batteries for 5 hours
12.
before first use.
13.
The battery charger gets
hot during use. The
charger’s heat can build
up to unsafe levels and
create a fire hazard if it does not
receive adequate ventilation, due to
an electrical fault, or if it is used in a
hot environment.
Do not place the charger on a flam
-
mable surface. Do not obstruct any
vents on the charger.
Especially
avoid placing the charger on car-
pets and rugs; they are not only
flammable, but they also obstruct
vents under the charger.
Place the charger on a stable, solid,
nonflammable surface (such as a
stable metal workbench or concrete
floor) at least 1 foot away from all
flammable objects, such as drapes or
walls. Keep a fire extinguisher and a
smoke detector in the area. Fre-
quently monitor the charger and
battery during use.
Charge indoors only.
14.
Do not charge batteries in tempera-
15.
tures below 0° C or above 40° C
(32°F - 104°F).
The batteries are Ni-CD (nickel cad-
16.
mium). Follow all local regulations in
regards to disposing of Ni-CD batter-
ies.
This product is not a toy. Keep it out
17.
of reach of children.
People with pacemakers should
18.
consult their physician(s) before use.
Electromagnetic fields in close prox
-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit Inter-
rupter (GFCI) should also be imple-
mented – it prevents sustained elec-
trical shock.
Some dust created by power sand-
19.
ing, sawing, grinding, drilling, and
other construction activities, contains
chemicals known [to the State of Cali-
fornia] to cause cancer, birth defects
or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and ce
-
ment or other masonry products
• Arsenic and chromium from chemi
-
cally treated lumber
Your risk from these exposures var-
ies, depending on how often you do
this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
