Harbor Freight Tools 65785, Instructions And Precautions

code search: 

Used to program the remote or to 

search through codes.

led IndIcator lIght: 

The LED flashes to show 

that the remote is working properly. Please note: 

The LED Indicator Light will activate whenever 

a button is pressed and will deactivate when the 

button is released. The LED Indicator light will also 

blink when codes are entered into the Remote.

on/oFF Button: 

Operates the same as your 

original remote. Some RCA, GE and ProScan  

models  require you to press the device button to 

turn on the unit and press the remote ON/OFF but-

ton to turn it off.

sleep: 

Allows you to set a time for you to turn off 

your device automatically.

guIde:  

Brings up the on-screen TV program 

guide, if your TV has that feature.

Menu:

 Brings up the Main Menu. If you already 

have the menu system, press SELECT to choose a 

highlighted choice.

go Back:

 Allows you to go to the previous chan-

nel.

Mute:

 Mutes volume on TV.

caBle, tV, Vcr, dVd, sat: 

Used to select the 

device you want to control. 

0-9 nuMBer Buttons: 

The number buttons 

operate the same as on your original remote and 

are used to enter device codes.

enter:

 Used to complete channel selection for 

some brands of TV.

tV/Vcr:

 Operates the TV/VCR function of your 

VCR.

naVIgatIon Buttons: 

Used to move though on 

screen menu and guide. With some DBS models 

up and down. On some DBS models the info But-

ton should be used to select the highlighted item.

VoluMe Buttons:

 Increases or decreases the 

volume.

channel Buttons: 

Increases or decreases the 

channel numbers.

reVerse, plaY, ForWard, rec:  

These but-

tons are for DVD//VCD/DVR use and operate the 

same as your original remote. You must press the 

RECORD button twice to start recording.

InFo: 

Shows the date and the time if your TV or 

VCR has that feature.

clear: 

Removes the on screen display to return 

to normal viewing. 

BatterY InstallatIon

Remove the battery compartment cover from 

1. 

the back of Remote.
Install (2) “AA” batteries, making sure to 

2. 

install according to indicated polarity.
Slide battery compartment battery over bat-

3. 

teries and snap into place.

operatIng InstructIons

For tV only (direct entry)

Find your brand and code in the lists on 

1. 

pages 7and 8 and follow the steps below.
Press the Code Search Button (1) until the 

2. 

LED Indicator turns on.  Then release the 

button.
Enter the corresponding 3-digit code.  After a 

3. 

valid code entry, the LED Indicator turns off.  

In case of an invalid code entry, the LED will 

flash.

With the unit (TV, DVD) on, press the Chan-

4. 

nel Up Button (5).  If the TV responds, no 

further programming is needed.  If it does 

not, try another code listed from your brand.
Use the chart below to record your codes for 

5. 

easy reference. 

 TYPE

UNIT

CODE

 TV

VCR

SAT

DVD

CABLE

If the unit does not respond after trying all 

6. 

the codes listed for your brand, do a manual 

code search by doing the following steps.

Button FunctIons

SKU 65785 

For technical questions, please call 1-800-444-3353. 

Page 3