Harbor Freight Tools 66687, Set Up And Operating Instructions Manual

Page 8

For technical questions, please call 1-800-444-3353.

SKU 66687 

the code, press ENTER. The LED will 

flash.
Press the Device Select Control 

7. 

button (CABLE, TV, VCR, DVD OR 

SAT) that you programmed. The LED 

will blink once.
Press the ON/OFF button. If the 

8. 

device you are programming turns 

off, you may have found the correct 

code. Press the ON/OFF button 

again. If the device turns on, you 

have found the correct code. If the 

device does not turn back on, this 

is not the correct code and you will 

need to try again with a different code 

from the list or use one of the other 

following methods to find the code 

with the remote.
Use the Personal Code Reference 

9. 

chart at the back of this manual to 

record your codes for easy reference.

Finding the code with the remote

Manually turn on the device to be 

1. 

controlled.
Press and hold the Code Search 

2. 

Button until the LED stays on.  

Release the Code Search Button.
Point the Remote at the device and 

3. 

press then release the Device Select 

Control button (CABLE, TV, VCR, 

DVD OR SAT) to select that unit.
Point the Remote at the device 

4. 

and press and release the ON/OFF 

Button. The LED will flash once, each 

time you press the ON/OFF Button. 

Keep doing this slowly until the 

device turns off. It may take up to 300 

times to reach the correct code since 

you will be searching through all the 

codes.
When the device turns off, 

5. 

immediately press and release the 

ENTER button to store the code for 

that device.
Press the ON/OFF button and the 

6. 

device should turn on (this ensures 

that the code was properly stored in 

the remote for that device).
Test all other buttons on the Remote 

7. 

to verify they work properly.

note: 

When the Remote is set and no 

keys have been pressed for fifteen 

seconds, the Code Search feature 

will automatically turn off. 

using the remote

Since the Remote controls more 

1. 

than one device, you must “tell” the 

Remote which device you wish to 

operate. If you wish to operate your 

TV, you must first press the TV key to 

put the Remote in the TV mode.
The Remote will stay in the selected 

2. 

mode (such as TV) until it is changed. 

If your Remote is in TV mode, you 

must change the mode to operate 

other devices like DVD, VCR, satellite 

receiver or cable box. For example, if 

the Remote is in VCR mode and you 

wish to turn off the TV, first press the 

TV key before pressing the ON/OFF 

Button.

on-screen menus-accessing and 

selecting menu items

Many devices have on screen menus 

to help you navigate through their 

features and functions. Although this