Harbor Freight Tools 66687, Set Up And Operating Instructions Manual

Page 9

For technical questions, please call 1-800-444-3353.

SKU 66687 

remote can not access every menu 

setting of every device, it does allow 

access to some device’s menus.
To use a device’s on-screen menu 

1. 

system, first turn on the TV and the 

device you want to access.
Press and release the TV button to  

2. 

access TV mode. 
Press and release the INPUT button 

3. 

several times to toggle through the 

video sources until the TV is selected.
Press and release the Device Select 

4. 

Control button (CABLE, TV, VCR, 

DVD OR SAT) of the menu you wish 

to access.
Press and release the Menu button. 

5. 

The LED will blink, indicating you are 

in Menu mode.
Use the Volume and Channel control  

6. 

buttons to navigate through the on-

screen menu system.
To make a selection from the on-

7. 

screen Menu, press the MENU, OK, 

INFO, and then ENTER keys to 

select the highlighted item.

note:

 If the Remote does not respond, 

make sure the LED light is still 

blinking.  Remember, it times out 

after fifteen seconds. If this happens, 

press the Menu Button again and 

retry selection.
The Remote automatically times out 

8. 

of Menu mode after fifteen seconds 

without a key being pressed. Once 

this happens, the Remote will clear 

the displayed menu from the TV.
If you wish to exit the menu yourself, 

9. 

press the corresponding device key 

on the Remote (TV, DVD, VCR, etc.)  
The LED light will turn off.

sleep timer

This feature allows the TV to turn off 

automatically after a specified length 

of time.  It can range from 1 to 99 

minutes. 

note: 

The Sleep Timer only works if you 

are programmed to your TV mode 

and have the Remote aimed at the 

TV.
To program the Sleep Timer, first 

1. 

press and release the TV Button.
Press and hold the Sleep Button for 

2. 

five seconds. The LED light will turn 

on.
Release the Sleep Button.

3. 

Using the number keys, enter the 

4. 

desired time in minutes (from 1 to 

99).  To set the Timer to a time that 

is under ten minutes, press “0” and 

then the desired number (“05” for 

five minutes.) The LED will blink with 

each pressed key.
Once the second number is entered, 

5. 

the LED turns off and the Sleep Timer 

is now set.
Leave the remote aimed at the TV. 

6. 

Once the Sleep Timer is set, you can 

continue to use the remote without 

affecting the Sleep Timer. However, 

because the timing mechanism 

for the Sleep Timer is built into the 

Remote itself, the remote must be 

in TV mode and pointed at the TV to 

activate the Sleep Timer.

note:

 If you press any key other than the 

numbers, they will be ignored. You