background image

SKU 90553

     PAGE 4

edges, or moving parts.  Replace damaged Power Cords immediately.  Damaged
Power Cords increase the risk of electric shock.

5.

Do not run the Power Cord or extension cord under rugs or carpeting.  Do not
run cords in traffic areas where they may be tripped over.

6.

When operating a power item outside, use an outdoor extension cord marked
“W-A” or “W”.  
These extension cords are rated for outdoor use, and reduce the risk
of electric shock.

PERSONAL SAFETY

7.

WARNING! This item  is HOT when in use. Avoid contact with this item when in
use. Keep it away from combustible materials, such as walls, curtains, pillows, etc.
when in use. When in use keep out of reach of children and pets. Never leave this
item unattended when in use.  Severe injury or fire may result from improper use.

8.

Never operate this heater if the cord is damaged, or if the item malfunctions, or
has been damaged or broken. Severe injury or property damage may result.
Return damaged items to Harbor Freight Tools, or a qualified repair person for repair
or replacement.

9.

Avoid accidental starting.  Be sure the Power Switch is off before plugging in.
Plugging in power items with the Power Switch on invites accidents. Always unplug
this item when not in use.

10.

Do not use this heater outdoors, or in moist locations such as a bathroom,
laundry room, etc. 
 This heater is not designed to be used in moist environments.
Personal injury or property damage may result from use in such locations.

11.

Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the item.  
Such preventive safety
measures reduce the risk of starting the item accidentally.

12.

Store powered items out of reach of children and other untrained persons.
Powered items are dangerous in the hands of untrained users.

SERVICE

13.

Repair service must be performed only by qualified repair personnel.  Service
or maintenance performed by unqualified personnel could result in a risk of injury.

14.

When servicing an item, use only identical replacement parts.  Follow
instructions in the

 “Inspection, Maintenance, And Cleaning” section of this

manual.  Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.

15.

Handle with Care. Do not move this item when in use. The heater core is fragile,
especially when hot.

ADDITIONAL SAFETY RULES

16.

Maintain labels and nameplates on the room heater.  These carry important
information.  If unreadable or missing, contact Harbor Freight Tools for a replacement.

Summary of Contents for 90553











Reviews: