SKU 94069
For technical questions, please call 1-800-444-3353.
Page 8
REPLACING THE BATTERIES
1.
On the underside of the Lamp Cover (2) turn the Switch (12) to its
“OFF”
position.
See Figure 8 on previous page.
2.
Unscrew the top light assembly from the Top Column (36). Remove the Lamp Cover
(2) by unscrewing Screws (22) with a screwdriver (not provided).
See Figure 9.
Also, loosen the Upper Reflector (19) underneath by unscrewing Screws (17). Set
screws aside and gently move the Upper Reflector to one side, being careful not to
damage the wires.
See Figures 10 & 11.
3.
Inside the Lamp Cover (2) are the battery compartments. Remove the Large and
Small Battery Compartment Lids (16 & 18).
See Figure 11.
4.
Replace old batteries with three new 1.2V NiCd “C” 2800 mAh Batteries (15).
Note
the polarity position of the old Batteries, Positive (+)
and
Negative
(
–
):
Install
the new Batteries in the same position. Reattach the Battery Compartment Lids.
See Figure 11
. (Dispose of old batteries at your local waste disposal facility.)
5.
Reassemble Reflector and top light unit and retighten the screws. This completes
the lamp assembly. Reattach to the Top Column (36). Turn the Switch (12) to “AUTO”.
Figure 9
Figure 10
Figure 11
Screw
(22)
Lamp
Cover
(2)
Large Battery
Compartment
Lid (16)
Small Battery
Compartment
Lid (18)
Screw
(17)
Upper
Reflector
(19)
REV 07/05
