background image

SKU 94740 

for technical questions, please call 1-800-444-3353.         Page 2

specificAtions

Materials

Thermoplastic Housing & Polystyrene; Color Black

Overall Dimensions

9-1/4”H x 6-1/2” Dia., Base Size 3.5”H X 5.2” Dia.

LED’s

LED Illumination: White, with 1200 MCD’s per LED.
Qty. 12, 100,000 Hour Lifetime

Solar Charge

8 Hours

Battery Requirements

NiCd Rechargeable AA Batteries X 3

AC/DC Adapter Input

120 V~, 60 Hz, 9 W

Adapter Output

DC 9V, 250 mA

Cord Length

40” Long

Net Weight

1.6 Lb.

save this manual

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.  
Keep your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number.  Keep this manual 
and invoice in a safe and dry place for future reference.

generAl sAfety rules

wArning!

reAd And understAnd All instructions

failure to follow all instructions listed below may result in 

electric shock, fire, and/or serious injury.

sAVe tHese instructions

do not operate in explosive atmospheres, such as in the presence of flam-
mable liquids, gases, or dust.  
Electrical products create sparks which may ignite 
the dust or fumes.

double insulated products are equipped with a polarized plug (one blade is 
wider than the other).  this plug will fit in a polarized outlet only one way.  if 
the plug does not fit fully in the outlet, reverse the plug.  if it still does not 
fit, contact a qualified electrician to install a polarized outlet.  do not change 
the plug in any way.
  Double insulation   eliminates the need for the three wire 
grounded power cord and grounded power supply system.

do not expose adapters to rain or wet conditions.  Water entering an adapter 
will increase the risk of electric shock.

1.

2.

3.

Summary of Contents for 94740









Reviews: