SKU 96513/14
For technical questions, please call 1-800-444-3353.
Page 2
Specifications
SKu
96513
96514
Construction
14 Gauge Stamped Steel Frame, Cast Alloy Hinges,
Carbon Steel Hardware
Finish
Galvanized Sheet Steel, Zinc Plated Hinges & Hardware
Maximum Weight Capacity
1000 lb. Per Pair, 500 lb. Per Single Ramp
Ramp Tread Dimensions
66” L X 8” W Perforated Steel
66” L X 9” W Perforated Steel
Ramp Overall Dimensions
6’ x 9”
6’ x 11”
Net Weight
30.5 lb. (Each Ramp)
33.1 lb. (Each Ramp)
Safety Chains
1 Per Ramp
nOTe: Maximum Load capacity = 1,000 lb. per pair, 500 lb. per individual ramp. Do not exceed
this maximum capacity.
SAVe THIS MAnuAL
You will need the manual for the safety warnings and precautions, assembly in-
structions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
SAFeTy WARnIngS AnD PRecAuTIOnS
WARnIng: When using this product, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
Avoid working alone. If an accident happens, an assistant can bring help.
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lighted.
3.
Keep children away. Children and pets must never be allowed in the area when you
4.
are loading or unloading a vehicle with the Tri-Fold Ramp. Do not let children climb or
walk on Ramp.
Store idle equipment. When not in use, the Ramp must be stored in a dry location to
5.
inhibit rust. Always lock up Ramp and keep out of reach of children.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
6.
parts. Protective, electrically non-conductive clothes and nonskid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair. Protect your
hands with heavy duty work gloves.
Use eye protection. Always wear ANSI-approved impact safety goggles.
7.
Do not overreach. Keep proper footing and balance at all times.
8.
Maintain Ramps with care. Inspect Ramps periodically, and if damaged, have them
9.
repaired by an authorized technician.
