Page 11
For technical questions, please call 1-888-866-5797.
Item 57042
RETURNS NOT ACCEPTED & WARRANTY VOID
if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
S
AFETY
O
PERA
TION
M
AINTENANCE
S
ETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under subheadings therein
before set up or use of this product.
INJECTION HAZARD!
Although this paint gun is airless, it still puts out paint at a very high pressure. Through
improper use, paint can be injected through a person’s skin, leading to serious injury, possibly
amputation. If paint is accidentally injected into someone’s skin, contact a doctor immediately.
Do not treat an injection injury as a simple cut. Injection can lead to amputation and requires immediate
surgical treatment. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems
are found, do not use tool until repaired.
Lock/Unlock Trigger
WARNING! TO PREVENT SERIOUS INJURY: Risk of Injection - Set Trigger Lock when Spray Gun not in use.
1. Rotate Trigger Lock all the way back to lock Trigger.
2. Rotate Trigger Lock forward to unlock Trigger.
Trigger
Lock
Depressurize Sprayer
WARNING! TO PREVENT SERIOUS INJURY: Risk of Injection - Unit maintains pressure after
shut-down - Before servicing, cleaning, or removing any part, shut off power and relieve pressure.
Refer to this section when instructed to depressurize sprayer.
1. Turn Power Switch off.
2. Lock Trigger.
3.
Turn Pressure Knob to lowest setting.
4. Reverse Spray Tip.
5. Rotate
PRIME/SPRAY
Valve to
SPRAY
position.
6. Unlock Trigger.
7. Point Spray Gun at interior side of empty
grounded metal container. Hold Trigger Guard
against container to ground Spray Gun.
Trigger
Guard
Empty
8. Press Trigger until pressure is relieved,
then release and lock Trigger.
9. Rotate Spray Tip to
SPRAY
position.
10. Rotate
PRIME/SPRAY
Valve to
PRIME
position when Sprayer not in use.