Page 13
For technical questions, please call 1-888-866-5797.
Item 57042
RETURNS NOT ACCEPTED & WARRANTY VOID
if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
S
AFETY
O
PERA
TION
M
AINTENANCE
S
ETUP
Prime with Paint
1. Prime with solvent according to
Prime
with Solvent on page 12.
2. Lock Trigger.
3.
CAUTION! To prevent high pressure
solvent or paint splatter, remove Nozzle
Guard and Spray Tip according to
Spray
Tip and Nozzle Guard on page 19
.
4. Strain paint through paint strainer.
5. Remove Suction Hose from solvent container
and place on bottom paint container.
6. Leave Priming Hose in waste container.
Suction
Hose
Priming
Hose
Paint
Waste
7.
Prime Pump:
a. Turn Pressure Knob to
PRIME/CLEAN
indicator.
b. Rotate
PRIME/SPRAY
Valve to
PRIME
position.
c. Turn Power Switch on. Pump will
start. If pump does not start, turn
Pressure Knob clockwise until it starts.
d. When solvent has been purged and
paint begins to flow out of Priming Hose,
rotate
PRIME/SPRAY
Valve to
SPRAY
position. Pump will cycle on then stop.
8.
Prime Spray Gun:
a. Unlock Trigger.
b. Point Spray Gun
at interior side of
waste container.
c. Press Trigger.
d. When solvent has been purged and
paint begins to flow, release and lock
Trigger. Pump will cycle on then stop.
9. Rotate
PRIME/SPRAY
Valve to
PRIME
position.
10. Remove Priming Hose from solvent
container and place into paint container.
Paint
11. Spray paint according to
Spraying on page 15.
NOTE: Dispose of solvent, paint and waste
according to local hazardous waste standards.