Page 19
For technical questions, please call 1-888-866-5797.
Item 57042
RETURNS NOT ACCEPTED & WARRANTY VOID
if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
S
AFETY
O
PERA
TION
M
AINTENANCE
S
ETUP
Spray Tip and Nozzle Guard
Attach
1. Seat Seal on end of Spray Tip, then insert
Seal into back of Nozzle Guard.
SPRA
Y
Seal
Nozzle
Guard
Spray
Tip
2. Insert Spray Tip, then rotate a full turn to align Seal.
SPRA
Y
3.
Remove Tip, then thread Nozzle Guard onto
Spray Gun. Turn nut by hand until almost tight,
then holding nut and Nozzle Guard together,
tighten completely. Do not overtighten.
• Attach horizontally for horizontal spray pattern.
• Attach vertically for vertical spray pattern.
4. Install Tip into Nozzle Guard, then rotate
until
SPRAY
end is facing forward.
SPRA
Y
Remove
1.
During operation:
Remove Spray Tip from Nozzle
Guard, then remove Nozzle Guard from Spray Gun.
2.
During cleaning or changing tip size:
Remove
Spray Tip from Nozzle Guard, then remove
Nozzle Guard from Spray Gun. Insert Spray Tip
into front of Nozzle Guard to remove Seal.
SPRAY