Page 2
For technical questions, please call 1-888-866-5797.
Item 57042
RETURNS NOT ACCEPTED & WARRANTY VOID
if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
S
AFETY
O
PERA
TION
M
AINTENANCE
S
ETUP
Table of Contents
Safety .......................................................................2
Specifications ...........................................................8
Setup ........................................................................9
Operation .................................................................11
Maintenance ............................................................18
Parts List and Diagram ............................................22
Warranty ..................................................................24
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS – To reduce the
risks of fire or explosion, electrical shock, and
the injury to persons, read and understand all
instructions included in this manual. Be familiar with
the controls and the proper usage of the equipment.
2.
WARNING – To reduce the risk of fire or explosion:
a.
Do not spray flammable or combustible materials
near an open flame or sources of ignition such
as cigarettes, motors, and electrical equipment.
b. For units intended for use with only
water-based or mineral spirit-type materials
with a minimum flash point of 38°C (100°F)
– Do not spray or clean with liquids having
a flash point less than 38°C (100°F).
c.
Paint or solvent flowing through the equipment
is able to result in static electricity. Static
electricity creates a risk of fire or explosion
in the presence of paint or solvent fumes.
All parts of the spray system, including
the pump, hose assembly, spray gun, and
objects in and around the spray area shall be
properly grounded to protect against static
discharge and sparks. Use only conductive or
grounded high-pressure airless paint sprayer
hoses specified by the manufacturer.
d. Verify that all containers and collection systems
are grounded to prevent static discharge.
e. Connect to a grounded outlet and use grounded
extension cords. Do not use a 3 to 2 adapter.
f. Do not use a paint or a solvent
containing halogenated hydrocarbons.
See operating instructions for examples
of these types of materials.
g. Keep spray area well ventilated. Keep a good
supply of fresh air moving through the area.
Keep pump assembly in a well ventilated
area. Do not spray pump assembly.
h. Do not smoke in the spray area.
i. Do not operate light switches, engines, or similar
spark producing products in the spray area.
j. Keep area clean and free of paint or solvent
containers, rags, and other flammable materials.
