Page 6
For technical questions, please call 1-888-866-5797.
Item 57042
RETURNS NOT ACCEPTED & WARRANTY VOID
if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.
S
AFETY
O
PERA
TION
M
AINTENANCE
S
ETUP
15. Paints and solvents may be harmful or fatal if
swallowed or inhaled. Avoid prolonged skin
contact with solvents or paints as they will
irritate skin. After any contact, immediately
wash off exposed area with hot, soapy water.
16. Keep paint hose away from sharp objects.
Bursting hoses may cause injury.
Examine hoses regularly and replace if damaged.
17. When flushing Paint Sprayer system,
use lowest possible pressure setting.
18. All hoses and spray gun accessories
used with Paint Sprayer must be pressure
rated at or above 3000 PSI.
19. The Paint Sprayer must be plugged into
an outlet that is grounded in accordance
with all local codes and ordinances.
20. Use caution while spraying on windy days.
21. Do not use Paint Sprayer without the
Spray Gun’s nozzle guard in place.
22. Paint Sprayer’s housing may become
hot during use. Do not touch housing
until it has completely cooled.
23.
Remove Spray Tip or turn to cleaning position
BEFORE cleaning or flushing Paint Sprayer system.
24. Do not use pliers to tighten or loosen
high pressure connections.
25.
Sparks from improper grounding
can ignite fumes!
Follow all local regulations regarding
the use of fluid supply containers
and solvent pails used with flushing the Paint
Sprayer. Use only conductive metal pails placed on
a grounded (concrete) surface. Do not place pails
on nonconductive surfaces (such as cardboard or
paper). Ground all metal pails by clamping one end
of a ground wire to the pail and the other end to a
grounded structure (such as a nearby pipe).
Maintain grounding, even when flushing or relieving
pressure from Paint Sprayer into metal pail.
The force of the spray can knock a metal pail over,
so hold down the metal pail and keep the metal
part of the spray gun set against the grounded
metal pail when pressing the spray gun trigger.
26. Maintain labels and nameplates on the sprayer.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
27. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
SAVE THESE INSTRUCTIONS.
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH FROM
INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. Do not modify the power cord plug provided with the tool. Never remove the
grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have
it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.