Page 8
For technical questions, please call 1-888-866-5797.
Item 57997
SaFety
Opera
tiOn
Maintenance
Setup
Operating instructions
read the entire iMpOrtant SaFety inFOrMatiOn section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
charging Battery pack
Charge battery before using this tool. Follow instructions
included with battery charger ( sold separately).
Workpiece and Work area Set up
1. Designate a work area that is clean
and well lit. The work area must not
allow access by children or pets to
prevent distraction and injury.
2. Secure loose workpieces using a
vise or clamps (not included) to
prevent movement while working.
3. There must not be objects, such
as utility lines, nearby that will
present a hazard while working.
4. Remove all flammable and heat sensitive
materials from the work area.
5. Plan an insulated, non-flammable surface
for the gun to cool down on after use.
6. Keep multiple class ABC fire
extinguishers readily accessible while
working and while workpiece cools.
General Operating instructions
1. Insert fully charged Battery Pack
into base of Glue Gun, making sure
it clicks into place securely.
WarninG! to prevent serious injury or
property damage, do not leave the Glue Gun
unattended while resting on surfaces or
objects.
cautiOn!
Do not block air Vents when
Glue Gun is in use, it could cause the tool to
over-heat.
2. Turn on Glue Gun by pushing Power Switch
and the LED should illuminate red. Allow
about two minutes for the Glue Gun to heat.
power Button
LeD
cautiOn! to prevent injury or property
damage: Do not touch or drop anything onto
the nozzle.
3. When the LED turns green the Glue Gun
has heated to operating temperature.
4. Load Glue Stick into the
back of the Glue Gun.
5. The Work Light may be illuminated by
pressing and holding the Power Switch.
6. Position the Nozzle over the workpiece
and squeeze the Trigger to push
the glue stick forward and hot glue
will expel from the Nozzle.
WarninG! to prevent serious injury,
including burns: Do not allow the hot glue to
touch skin.
7. Apply glue in small amounts and
press the glued material together
until the hot glue has cooled.
