Page 9
For technical questions, please call 1-888-866-5797.
Item 57997
Sa
F
ety
Opera
ti
O
n
Maintenance
Setup
8. When the glue stick cannot not move forward,
insert a new glue stick behind it. Use the
glue stick until it is completely used up.
9. When finished with the Glue Gun, remove
glue stick and any remaining glue inside
the Glue Gun by pressing the Trigger until
all melted glue is expelled onto a piece
of foil or other heat resistant surface.
Once the glue has cooled, discard it.
10. To prevent accidents, turn off the Glue Gun
by pressing the Power Switch. The
Work Light and LED should turn off.
• Remove the Battery Pack after use.
• Allow the Glue Gun to cool down on an
insulated, non-flammable surface.
cautiOn!
after use, do not touch
nozzle until it has had time to cool.
cautiOn! Do not leave work area
until Glue Gun has cooled. Be alert
for indications of concealed fire.
11. Allow time for the Glue Gun to cool
then clean and store the Glue Gun
indoors out of children’s reach.
