SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.
MAINTAIN A SAFE WORKING ENVIRONMENT.
Keep the work area well lit.
Make sure there is adequate surrounding workspace. Always keep the work
area free of obstructions, grease, oil, trash, and other debris. Do not use the
Cordless Screwdriver in a damp or wet location. Do not use near flammable
gasses or liquids.
2.
GROUND THIS PRODUCT.
The electrical Charger for this product is equipped
with a 2-prong Plug. Never modify the Charger in any way. To comply with the
National Electric Code, and to provide additional protection from the risk of
electrical shock, this product should only be connected to a 3-prong Adapter Plug
(not provided), and a 120 Volt, 3-hole electrical outlet that is protected by a
Ground Fault Circuit Interrupter (GFCI).
(See Figure A.)
CHARGER
3-PRONG
ADAPTER PLUG
120 VOLT
OUTLET
FIGURE A
3.
IF AN EXTENSION CORD (not provided) IS USED, MAKE SURE TO USE
ONLY UL APPROVED CORDS HAVING THE CORRECT GAUGE AND
LENGTH. (See Figure B, next page.)
4.
PROTECT THE CHARGER CORD.
Do not carry the Cordless Screwdriver by its
Charger Cord, or pull the Charger Cord to remove the Charger from an electrical
outlet. Protect the Charger Cord from sharp objects, heat, and oil.
5.
HOLD THE CORDLESS SCREWDRIVER FIRMLY SO THAT IT WILL NOT BE
PULLED FROM YOUR HANDS WHILE IN USE.
6.
SECURE THE WORKPIECE.
Whenever possible, secure the workpiece with a
vise or clamps.
SKU 47953
PAGE 4
