Page 2
SKU 92509
For technical questions, please call 1-800-444-3353
SPECIFICATIONS
Item Description
Motor
120 VAC, 4 amps (no load), 6.2 amps (startup);
Double
Insulated; 34,000 RPM
Line Cord
6’ 4” (L), 2-prong, polarized plug, U.L. Listed
Switch Type
Toggle
Collet Adapters
1/8 and 1/4 inch
Overall Dimensions
9.25 (H) x 4 (dia.) inches
Accessories
Circle cutting jig (2-3/4 to 8-1/2 inch circles)
Removable handle
Trimmer Guide
Tilt Base with gauge
Plastic case
Bit Sizes
Up to ¾ inch cutting diameter
Weight 3.5
lbs.
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTION
Work Area
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
4.
Use tool in a well ventilated area.
E194601