background image

Page 7

For technical questions, please call 1-888-866-5797.

Item 58203 
        

ttt

User-Maintenance Instructions

  Procedures not specifically explained in this manual must 

be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY: 
Remove Jack from trailer before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: 
Do not use damaged equipment.  If abnormal noise or vibration occurs, 
have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1. 

BEFORE EACH USE,

 inspect the general 

condition of the tool.  Check for:
•  loose hardware
•  misalignment or binding of moving parts
•  cracked or broken parts
•  any other condition that may 

affect its safe operation

2.  If welded, check welds for cracks.

3.  If the Trailer Jack has been exposed to salt water, 

immediately wash off with fresh water.  Then 
use a light oil to lubricate all moving parts.

4. 

AFTER USE,

 wipe external surfaces 

of the tool with clean cloth.

PLEASE READ THE FOLLOWING CAREFULLY

7+(0$18)$&785(5$1'25',675,%8725+$63529,'('7+(3$576/,67$1'$66(0%/<',$*5$0

IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR DISTRIBUTOR 
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS 
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE 
ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY 
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND 
LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY 

$5,6,1*2872)+,625+(55(3$,56727+(25,*,1$/352'8&7255(3/$&(0(173$576
7+(5(7225$5,6,1*2872)+,625+(5,167$//$7,212)5(3/$&(0(173$5767+(5(72

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability 

standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship 
for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or 
indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, 
improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, 
injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use 
of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER 

:$55$17,(6(;35(6625,03/,(',1&/8',1*7+(:$55$17,(62)0(5&+$17$%,/,7<$1'),71(66

To take advantage of this warranty, the product or part must be returned to us with transportation charges 

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. 
If our inspection verifies the defect, we will either repair or replace the product at our election or we may 
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will 
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted 
from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

SAFETY

OPERA

TION

MAINTENANCE

INST

ALLA

TION

Summary of Contents for Haulmaster 58203









Reviews: