Page 5
For technical questions, please call 1-888-866-5797.
Item 56833
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE,
inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. LEDs gradually emit less light over their lifetime.
3.
PERIODICALLY,
clean Lights, Battery
Box, and Remote Control using a mild,
nonabrasive cleaner and clean soft cloth.
Replacing the Battery in the Remote Control
1. Access the battery from the back
of the Remote Control.
2. Push the release button to the right and
carefully slide out the battery drawer.
Release Button
Battery
Drawer
Back of
Remote Control
3. Remove the old battery, noting
polarity (positive “+” faces up).
4. Place the new CR2025 battery in
drawer with “+” facing up.
5. Slide drawer closed until it snaps in place.
6. Battery must be recycled or disposed of
properly. Keep out of reach of children.
