background image

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

Owner’s Manual & Safety Instructions

Save This Manual

 

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures.  Write the product’s serial number in the 
back of the manual near the assembly diagram (or month and year of purchase if product has no number). 
Keep this manual and the receipt in a safe and dry place for future reference.

 

20h

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please call 1-888-866-5797 as soon as possible.

Copyright

©

 2020 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  

Tools required for assembly and service may not be included.

Read this material before using this product. 
Failure to do so can result in serious injury. 
SAVE THIS MANUAL.

Summary of Contents for PITTSBURGH 61411

Page 1: ...rence 20h When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2020 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manua...

Page 2: ...o determine that it is not hardened by attempting to mark it with a file If the material marks with a file material should be cuttable If the material will not mark with a file do not cut threads to avoid tool damage Tap Instructions TAPS are used to cut tapping or clean chase internal threads into a pre drilled hole such as in a nut or component part 1 To cut an internal thread first select the t...

Page 3: ...he included Screwdriver Use the Screw on side of the Die Wrench to secure the Die firmly in place Screw Die 5 Place the chamfered side of the Die onto the workpiece being careful to precisely align the Die perpendicular to the rod 6 Begin turning the Die clockwise The cutting edges will begin to bite into the material and the Die will begin to thread itself onto the rod 7 As you progress apply lub...

Page 4: ...RRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may ele...

Reviews: