background image

SKU 95122     

For technical questions please call 1-800-444-3353

   Page 2  

specifications

Pressure Capacity 24,000 lb. (12 tons)

Type

3 jaw puller with hydraulic 
cylinder

Size Capacity

4 settings for 4”, 6”, 8” and 
10” Bearings

Jaw Reach

3” Min. - 6” Max.

Jaw Spread

4” Min. - 10” Max.

Cylinder 
Dimensions

1-½” Dia. x 6-¾” L

Overall 
Dimensions

4-¾” D x 17” H

Weight

9.8 lb.

save This Manual

You will need the manual for the safety warnings and precautions, assembly 
instructions, operating and maintenance procedures, parts list and diagram.  Keep 
your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Keep the manual and invoice in a safe and dry place for future reference.

safety warnings and Precautions

warninG: when using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.

read all instructions before using this tool!

1. 

Keep work area clean

.  Cluttered areas invite injuries.

2. 

observe work area conditions

.  Do not use machines or power tools in 

damp or wet locations.  Don’t expose to rain.  Keep work area well lit.  

3. 

Keep children away

.  Children must never be allowed in the work area.  Do 

not let them handle machines, tools, or extension cords.

4. 

store idle equipment

.  When not in use, tools must be stored in a dry 

location to inhibit rust.  Always lock up tools and keep out of reach of 
children.

5. 

use the right tool for the job

. Do not attempt to force a small tool or 

attachment to do the work of a larger industrial tool. There are certain 
applications for which this tool was designed. It will do the job better 
and more safely at the rate for which it was intended. Do not modify this 
tool and do not use this tool for a purpose for which it was not intended.

6. 

dress properly

.  Do not wear loose clothing or jewelry as they can be 

caught in moving parts.  Protective, electrically non-conductive clothes and 
non-skid footwear are recommended when working.  Wear restrictive hair 
covering to contain long hair.

Brought to You by www.snapwhole.com

Summary of Contents for Pittsburgh 95122








Reviews: