Page 13
For technical questions, please call 1-888-866-5797.
ITEM 62523
Sa
FET
y
Op
E
ra
T
iO
n
Main
TE
nan
CE
S
ET
up
Maintenance
WarninG
TO prEVEnT SEriOuS inJury FrOM aCCiDEnTaL STarTinG:
Turn the Combination Switch of the equipment to its “OFF” position, wait for the engine to cool, and
disconnect the spark plug cap before performing any inspection, maintenance, or cleaning procedures.
TO prEVEnT SEriOuS inJury FrOM EQuipMEnT FaiLurE:
Do not use damaged equipment. if abnormal noise, vibration, or
excess smoking occurs, have the problem corrected before further use.
Follow all service instructions in this manual. The engine may fail critically if not serviced properly.
Many maintenance procedures, including any not detailed in this manual, will need to be performed
by a qualified technician for safety. if you have any doubts about your ability to safely service the
equipment or engine, have a qualified technician service the equipment instead.
Cleaning, Maintenance, and Lubrication Schedule
note:
This maintenance schedule is intended solely as a general guide. If performance decreases or if
equipment operates unusually, check systems immediately. The maintenance needs of each piece of equipment
will differ depending on factors such as duty cycle, temperature, air quality, fuel quality, and other factors.
note:
The following procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the engine and equipment.
procedure
Before
Each use
Monthly
or every 8
hr. of use
Every 3 mo. or
50 hr. of use
Every 6 mo. or
100 hr. of use
yearly or
every 300
hr. of use
Every
2 years
Brush off outside of engine
Check engine oil level
Check air filter
Change engine oil
Clean/replace air cleaner
*
Check and clean spark plug
1. Check/adjust idle speed
2. Check/adjust valve clearance
3. Clean fuel tank, strainer
and carburetor
4. Clean carbon build-up from
combustion chamber
**
**
Replace fuel line if necessary
**
*
Service more frequently when used in dusty areas.
**
These items should be serviced by a qualified technician.
