NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as
replacement parts.
SKU 02453
Page 4
Mounting
1. The Tidy-Up Organizer should be mounted in a low
traffic area, away from children. For safety, the Tidy-
Up Organizer should be mounted above head level.
2. To achieve full load capacity, prepare a solid wood
mounting surface. The mounting plate (not included)
should be 3/4” thick plywood or particle board.
3. The mounting plate must be securely fastened
between 2 wall studs as shown in Figure 2. At least
four #8 or larger screws must penetrate the wall studs
1-1/4” or more.
4. Mount the Tidy-Up Organizer and Bonus Hooks in
any desired location (Figure 2). Use #8 - 3/4” flat
bottom head screws (included) as shown in Figure 2.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
Wall Studs
Sheetrock
Mounting Plate
Bonus Hooks
Large Hook “A” Reference (4 lb. maximum load)
Small Hook “B” Reference (1 lb. maximum load)
#8 Screws
#8 x 3/4 Screws (12 included)
Figure 2
Brought To You By Augusta Flint
