For technical questions, please call 1-888-866-5797
12
ENHANCED DTCs (FORD / MAZDA ONLY)
Using the Scan Tool
VIEWING OEM ENHANCED DTCs (Ford/Mazda only)
12
2.
Refer to DISPLAY FUNCTIONS on page 2 for a description of LCD
display elements.
If the definition for the currently
displayed code is not available,
an advisory message shows.
I/M MONITOR STATUS icons
are not displayed when
viewing enhanced DTCs.
In the case of long code
definitions, a small arrow is
shown in the upper/lower
right-hand corner of the code display area to indicate the
presence of additional information.
If no codes are present, the message “No OEM Enhanced DTC’s
are presently stored in the vehicle’s computer” shows. Press
SYSTEM MENU
to return to the System Menu.
3.
If more than one code was retrieved press
DTC/FF
, as necessary,
to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press
LINK
again.
4.
When the last retrieved DTC has been displayed and
DTC/FF
is
pressed, the Scan Tool returns to the “Priority” Code.
To exit the enhanced mode, press
SYSTEM MENU
to return
to the System Menu. Select
Global OBD
, then press
ENTER
to return to the Global OBD2 mode.
VIEWING OEM ENHANCED DTCs (Ford/Mazda only)
Mazda Enhanced DTCs are available for
Mazda-branded
Ford vehicles only
.
When
Ford OEM Enhanced
is chosen from
the System Menu, the Ford Enhanced
menu displays. You may view OEM DTCs
for either the “Continuous Memory Test”,
“KOEO (Key On Engine Off) Test” or
“KOER (Key On Engine Running) Test.”
1.
Select the desired option, then press
ENTER
.
If
KOER
is selected, an advisory message shows.
- Start and warm the engine to normal operating temperature,
then press
ENTER
. Proceed to step
3
.
2.
If
KOEO
or
Continuous Memory
is selected, an “instructional”
message shows.
