For technical questions, please call 1-888-866-5797
23
SYSTEM TEST MENU
Additional Functions
SYSTEM TEST MENU
23
OBD Monitor Test
The
OBD Monitor Test
function retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored. The tests available are determined by the
vehicle manufacturer.
The diagnostic tool does not perform the OBD monitor test, but
retrieves results from the most recently performed tests from
the on-board computer’s memory. You may retrieve OBD
monitor test results for only one test at any given time.
1.
From the System Test menu, select
OBD Monitor Test
, then press
ENTER
.
2.
A “One moment please. . .” message
displays, followed by the Select Test
screen. (Refer to the vehicle’s service
repair manual for information related to
non-continuous tests.)
If OBD monitor test data is not presently stored in the vehicle’s
computer, an advisory message displays. Press
M
to return to
the Main Menu.
If OBD monitor tests are not supported by the vehicle under test,
an advisory message displays. Press
M
to return to the Main
Menu.
3.
Select the desired test, then press
ENTER
to display the test results.
The display shows the following
information:
Test ID
number
Module ID
number
Component ID
number
Min
or
Max
test limit (
Only one test limit, either
Min
or
Max
, is
shown for any given test.
)
Test Value
and status
Status is calculated by the diagnostic tool by comparing the
Test Value
against the displayed test limit (either
Min
or
Max
).
Status is shown as either
Low
,
High
or
OK
.
4.
When you have finished viewing the retrieved test data, select
Back
on the Select Test screen, then press
ENTER
to return to the
System Test menu; or, press
M
to return to the Main Menu.
EVAP Test
The
EVAP Test
function lets you initiate a leak test for the vehicle's
EVAP system.
Summary of Contents for ZURICH OBD2
Page 1: ......
