1 4
REVERSING THE DOOR SWING CONT.
•
Dismantle the door axle sleeve (6) at the lower part of the glass door, the door stopper block screws (8)
and door stopper (7), and fix them to the opposite side of the Beverage Chiller.
•
Using two people, lay the unit down on its back. Dismantle the adjustable foot (11), positioning bolts
(4), and lower hinge (10), then swap opposing side parts (eg. the parts on the right side are swapped
with the left side). Use the reverse method of this step to install the adjustable foot, lower hinge and
positioning bolts. Using two people, place the unit upright again and wait at least half an hour before
reconnecting it to the power
•
Place the glass door on the lower hinge and fix the upper hinge (5). Align the door with the cabinet then
check the tightness of gasket. Complete by installing the screws (2) and mounting cover (3).
④
④
⑩
⑩
1
11
1
Note: The images in this user manual are for reference only. Your appliance may appear differently.
➂
➄
➁