- 13 -
5. BEFORE STARTING ENGINE
1) Fill recommended engine oil to the upper limit mark if the oil is short.
2) Change oil if it becomes dirty or discolored.
Oil capacity at upper limit mark:
See attached OPERATOR’S MANUAL.
3) Remove the tank cap and check the fuel
level.
If fuel level is low, refill with unleaded
automotive gasoline.
4) Fuel tank capacity: see page 20 (this
INSTRUCTION MANUAL)
5) Battery liquid is not in at the time of the
factory shipment. Fill a suitable battery
liquid.
1) Remove the battery cell caps.
2) Fill the electrolyte into the each cell,
the level must be maintained between the
UPPER and LOWER limit marks.
3) Peel the protection seal.
Protection seal
Battery cell cap
UPPER LIMIT
LOWER LIMIT
Summary of Contents for SGB16500VSa
