Hard Head 013990, Operating Instructions Manual

EN

10

INSTALLATION

INSERTING THE BATTERIES

1.  Open the door.
2.  Insert four AA batteries in the battery 

compartment.

3.  In normal circumstances the batteries 

should be replaced if both the red and 
green lights go on at the same time.

INSTALLING THE SAFE 

1.  Drill a screw holes at the required place.
2.  Screw expander screws anticlockwise to 

separate.

3.  Mount the safe on the wall with expander 

screws, or the like.

4.  Check that the safe is correctly positioned 

and tighten the screw unions.

     IMPORTANT:   

•  Use screws suitable for the underlying 

surface.

•  Insert four new batteries with the correct 

polarity as shown by the markings in the 
battery compartment. 

•  If the power supply has been interrupted 

for more than 30 minutes, you must 
enter a new user code.

USE

OPENING THE SAFE FOR THE FIRST 
TIME

Use the emergency key to open the safe the 
first time. Follow the instructions in the section 
on opening the safe with the emergency key.
1.  Remove the emergency lock cover, 

insert the emergency key and turn it 
anticlockwise.

2.  Turn the knob (main key) clockwise to 

open the door.

3.  Complete this operation, pull out the 

emergency key and store it in a safe place.

SAFETY INSTRUCTIONS

     NOTE:   
Never store emergency keys in the safe.

SYMBOLS

Read the instructions.

Approved in accordance with 
the relevant directives.

Recycle discarded product 
in accordance with local 
regulations.

TECHNICAL DATA

Battery 

4 x 1.5 V AA

Size 

H 200 x W 310 x D 200 mm

Weight 

4.5 kg

Volume 

8,5 l

Material 

Sheet steel

Wall thickness 

1 mm

Door thickness 

3 mm

Emergency keys 

2

DESCRIPTION

1.  Lock bolts
2.  Reset button
3.  Battery compartment
4.  Knob (main key)
5.  Emergency lock cover
6.  Green light
7.  Red light
8.  Yellow light
9.  Confirm button

     FIG.   1