EN
21
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Voltage
230 V ~ 50 Hz
Connection 1/2"
Working pressure
8 bar
Volume
100 l
Output 1500 W
Cord length
1.1 m
Energy class (A+ - F)
C
Working temperature
10 – 70°C
Size
H99 x Ø44 cm
Weight
24,7 kg
DESCRIPTION
Hot water heater with large capacity and status
indicator. Glass ceramic water tank and anode
protection against corrosion for long life span.
With stainless steel pipe for the hot water
and safety valve. For wall mounting with pipe
connection in the bottom.
COMPONENT PARTS
• The product consists of a steel container
(water tank) and a plastic casing, with
thermal insulation in between, plus two
pipes with G 1/2” thread for cold water inlet
(marked with blue ring) and hot water outlet
(marked with red ring). The water tank is
made of steel with a glass ceramic coating
that provides protection from corrosion.
Thermostat
On the flange there is an electric heater
element and thermostat. Products with glass
ceramic coating have a sacrificial magnesium
anode. The electric heater element heats
the water in the tank and is controlled by the
SAFETY INSTRUCTIONS
• This product can be used by children from
8 years and upwards and by persons with
physical, sensorial or mental disabilities,
or persons who lack experience or
knowledge, if they are supervised or
receive instructions concerning the safe
use of the product and understand the
risks involved with its use. Do not allow
children to play with the product. Do not
allow children to clean or maintain the
product without supervision.
• Keep children under supervision to make
sure they do not play with the product.
• Do not allow children to clean or maintain
the product without supervision.
• Incorrect installation and/or connection of
the product can result in a risk of personal
or fatal injury. Incorrect installation and/
or connection of the product can result in
a risk of material damage, including but
not limited to explosion, fire and/or water
damage.
• Installation, electrical connection,
connection to water pipe and
commissioning should be carried out by
authorised electrician and personnel with
authorisation to carry out installation
and/or connection of products in this
category, and in compliance current
legislation.
• It is not permitted to modify the product
and/or electrical circuits. Modification
refers to dismantling and/or bypassing
elements included in the product on
delivery, installation and/connection of
elements not included in the product on
delivery, and replacement of elements
included in the product on delivery with
elements that have not been approved by
the manufacturer.
SYMBOLS
Read the instructions.
Summary of Contents for 021095
Page 4: ...3 4 1 2 ...
