Hard Head 213-015, User Instructions

ENGLISH 

12 

ENGLISH 

SAFETY INSTRUCTIONS 

Please read these instructions carefully before use!

WARNING!



Always take basic safety precautions when using the tool to safeguard against the risk of fire, 
electric shock and/or personal injury. Read these instructions carefully before use and save them 
for future reference. 



Do not allow children to use the tool. Keep onlookers away from the work area. 



Avoid the risk of electric shock. Keep the cord away from the work area. Never work in the vicinity 
of live conductors or equipment. 



Do not use the product in damp or wet areas. Do not expose the product to rain. Do not use the 
product in the vicinity of flammable liquids or gases. 



Wear safety glasses. Wear a hair net if you have long hair. 



Do not wear loose-fitting clothing or jewellery, watches or the like, as these can get caught. 



Store the product in a dry place and out of the reach of children when not in use. Only use the 
product for its intended purpose. 



Never use the power cord to carry or pull the product, or to pull out the plug from the mains socket. 
Keep the power cord away from heat, oil and sharp edges. Replace the power cord if it gets 
damaged. 



Always check before using the product that the power cord is undamaged. 



Check the power cord and any extension cords for damage at regular intervals. Repairs must only 
be carried out by qualified personnel. Keep the handle and grips dry and clean. The product does 
not contain any parts that can be repaired by the user. 



Pull out the plug when the product is not in use. 



Never use power tools if you are tired or under the influence of drugs, alcohol or medication. 



 Special 

safety 

instructions 



Always use the stand, to avoid burning the surface. 



The products are not intended for continuous use. Note the duty factor for the product: 20%. 



Allow the product to cool after use. Never cool the product with water, or the like. 



Make sure that solder does not accidentally come into contact with the soldering tip when the 
power cord is plugged in. 

TECHNICAL DATA 

Rated voltage 

230 VAC, 50 Hz 8 mm 

Output, soldering gun 

100 W 

Output, soldering pencil 

30 W 

Fuse 3 

A