HARD Stockton N1035P, Instructions For The Assembly



Never leave the person in the bed unattended when the side rail is lowered, or when 

the head is elevated if there is any risk they will be able to get over the side rails and fall.



The mattress and/or heavy duty bumper pads should be checked regularly and replaced 

if there are any tears in the fabric.



Never replace the mattress that Hard Manufacturing provides with another manufacturer's 

product. Our mattresses are a custom size and other mattresses not supplied by 
Hard Manufacturing may not 

fi

 t properly and could potentially cause entrapment hazards. 

An improper mattress will also make the bed di

ffi

  cult to operate as they will most likely be too 

wide, and may cause damage to the bed components over time.



The weight limit of any of the cribs or beds made by Hard Manufacturing is 150lbs. If the 

weight limit of the bed is exceeded, the additional weight could cause  damage to the bed 
components that could lead to expensive repairs and/or make the bed unsafe for daily use 
for the patient as a result. A parent/caregiver should not get into the bed with the patient.



HARD Manufacturing will support parts on our cribs and beds for up to 12 years from 

the date of manufacture as long as we still make the part or can obtain it from our vendors.



HARD Manufacturing cribs and beds can be cleaned with an anti-bacterial all purpose 

cleaner of the parent/caregiver choice but it must be a non-abrasive cleaner. 

Anything 

containing bleach, alcohol or ammonia must be avoided. 

The crib should be dried          

thoroughly with a soft cloth immediately following the cleaning, the crib should never be 
allowed to air dry. 

Failure to follow the proper cleaning instructions can result in     

premature rust and corrosion of the parts on your cribs.

If the crib or bed for your child needs a part, new mattress, bumper 
pads,  etc-  please  contact  the  durable  medical  equipment  dealer  who             
purchased the bed on behalf of your child or the patient.

Please write the info here for your reference if needed at a later date:

Dealer name:______________________________________________________________

Dealer phone number_______________________________________________________

Model # of the crib or bed purchased___________________________________________

Date the crib or bed was manufactured__________________________________________

The sticker with the model # and date of manufacture is on the crib or bed and will look like 
the following example:

GENERAL INFORMATION FOR CAREGIVERS