INSTRUCTION
6. Charging inform
Insert the USB charger into the USB port and connect
it to the USB charger port on the inflator.
When " " flashes on the inflator, the battery is being
charged. When " " flashes stop and the display
shows 3 grids indicating fully charged.
Storage bag
Note:
Please tighten points A
and B before inflating.
Note:
Please do not hoist the
product when using it.
This will shorten the
service life of the tube.
7. Inflation
Start to inflate: short press the on/off button to start
inflating. During the inflation process, there will be a
noise of 75-85 decibels. Please be careful while doing
this. If it's in use for a long time ,the temperature of
the of the high-ppressure air tube and the host rises;
avoid long-term contact with the high-pressure air
tube by hand.
Stop inflating: when the air pressure reaches the
preset pressure value, the inflator automatically stops
inflating. The inflation can also be stopped by press
the on/off button shortly during the inflation process.
06