background image

INSTRUCTION

8. Detect air pressure

In the inflator on state, connect the high-pressure air 

inflation tube with the object, and the number 

displayed on the inflatable pump display is the current 

pressure.

Please be careful, the temperature of the high-pres-

sure air tube and the host will rise while the inflation 

Warning

9. Unscrew the nozzle 

The temperature of the high-press air inflation tube is 

high after inflation. Please take the necessary precau-

tion to protect yourself when disassembling the 

nozzle. There will be a slight air leakage during 

disassembly. Please disassemble quickly to reduce the 

amount of air outlet.

10. Can be used as a power bank

In the state of full power, the inflator can be used as a 

power bank, and it needs to be turned on.

SAFTY NOTE

1. This product is not a toy, children are prohibited 

from use. Users are advised to be over 16 years of age. 

During the inflation process, please keep a safe 

distance between the children and the inflator.
2. The product has a built-in non-removable lithium 

battery, and it is forbidden to throw the product into 

the fire or abandon it at will. There might be a risk of 

07

Summary of Contents for CZCQ-101













Reviews: