background image

ALPHA

Instruction book

670701-GB-97/1

Illustrations, technical information and data in this book are to the best of our
belief correct at the time of printing. As it is HARDI INTERNATIONAL A/S policy
permanently to improve our products, we reserve the right to make changes in
design, features, accessories, specifications and maintenance instructions at any
time and without notice.

HARDI INTERNATIONAL A/S is without any obligation in relation to implements
purchased before or after such changes.

HARDI INTERNATIONAL A/S cannot undertake any responsibility for possible
omissions or inaccuracies in this publication, although everything possible has
been done to make it complete and correct.

As this instruction book covers all models, features or equipment, which are
available in certain countries only can be shown. Please pay attention to para-
graphs dealing with precisely your model.

Published and printed by HARDI INTERNATIONAL A/S

EC Declaration of Conformity

Manufacturer,

HARDI-EVRARD
301, Rue du 21 Mai 1940
F - 62990  BEAURAINVILLE

Importer

declares that the following product

SPRAYER Model ALPHA 2000 and ALPHA 2500

was manufactured in conformity with the provisions in
the COUNCIL DIRECTIVE on mutual approximation of
the laws of the Member States on the safety of ma-
chines, 89/392/CE, 91/368/CE og 93/368/CE

was manufactured in conformity with special reference
to the Directive on essential safety and health require-
ments taking into account the following standards:

EN 292-1
EN 292-2

Furthermore, the owner of the material must keep this
manual as long as the machine is in his possession,
and when passing it on to a possible new owner he
must also pass on the manual.

Beaurainville, 1st January, 1997.

The director
HARDI-EVRARD S.A.

Summary of Contents for ALPHA 2000





















































Reviews: