Hardi Eagle Boom, Operator'S Manual

4

EAGLE BOOM

Introduction

The reliability and efficiency of the HARDI
EAGLE boom depends upon your care. The
first step is to take the time to carefully read

this operator’s manual. It contains essential information
on efficient and safe operation of the HARDI EAGLE
boom.

Thankyou for choosing HARDI and welcome to the
increasing family of HARDI spraying equipment owners.

Boom use

The HARDI EAGLE boom is for use on a HARDI
sprayer - for the application of plant protection and liquid
fertiliser chemicals. The sprayer fitted with the EAGLE
boom must only be used for this purpose. It is not
allowable to use the sprayer for other purposes. If no
local law demands that the operator must be certified to
use spray equipment, it is strongly recommended to be
trained in the safe handling of plant protection chemicals
and plant protection, to avoid unnecessary risk for
persons and the environment.

Identification details

Please record applicable details below:

Producers Name: ...................................................

Size: .......................................................................

Model: .....................................................................

Date: .......................................................................

Dealer Name: .........................................................

Safety

This is the safety alert symbol: 

When you see the symbol in this manual or on the
spraying equipment, be alert because it means
WARNING your safety is involved.

Note the following recommended precautions and safe
operating practices:

Read and understand this operator’s manual
before using the equipment. It is equally important
that other operators of this equipment read and
understand this manual.

You must read chemical labels and follow the
instructions they contain prior to using them.
Chemical labels are registered by the National
Registration Authority. However each state gov-
erns the purpose for which a chemical may be
used, this varies from state to state.

Local law may demand that the operator be certi-
fied to use spraying equipment. Adhere to the law.

Pressure test with clean water prior to using
chemicals.

Wear protective clothing.

Rinse and wash equipment after use and before
servicing.

Depressurise equipment after use and before
servicing.

Never service or repair the equipment whilst it is
operating.

Disconnect electrical power before servicing.

Always replace all safety devices or shields imme-
diately after servicing.

If an arc welder is used on the equipment or
anything connected to the equipment, disconnect
power leads before welding. Remove all inflamma-
ble or explosive material from the area.

Do not eat, drink or smoke whilst spraying or
working with contaminated equipment.

Wash and change clothes after spraying.

Wash tools if they have become contaminated.

In case of poisoning, immediately seek medical
advice. Remember to identify chemicals used.

Keep children away from the equipment.

Do not go under any part of the equipment unless it
is secured. The boom is secure when placed in the
transport brackets.

If any portion of this operator’s manual remains
unclear after reading it, contact your HARDI dealer
for further explanation before using the equipment.